SimTek FP72X72EBRN Installation Guide

FENCEINSTALLATION GUIDE6’ HIGH FENCE1.866.648.9336 www.simtekfence.com

Step #2: Gate OpeningsAll gates require about a 1 ½” gap between the gate and the gate post, and about a 1” gap between the gate and the end post or b

Step #3: Gate Hardware InstallationA. Thread the ½” hinge rod into the upper and lower inserts in the gate metal frame leaving about 1 ½” from

SimTek™ Fence warrants the product line to be free from manufacturing defects in materials and workmanship for 25-years from the date of purchase, or

INSTALLATION GUIDEThese instructions are designed to assist both professional installers and do-it-yourselfers of SimTek™ decorative rock-walls. Thes

Step 1: Lay Out Fence Line1. Locate your property line and stretch a string between stakes from the beginning to the end of the fence to ensure

Step 3: Installing Fence BracketsIf posts are to be installed in level ground attaching brackets in advance of post installation is easiest when using

Step 5: Installing Fence Panels1. Panel support brackets must be attached to all posts. 2. Be certain steel stiffeners are inserted in the top and

Step 7: Cutting PanelsWhere a narrower panel is required to nish a wall, pan-els can be cut to any desired length. 1. Remove steel stiffeners from

7. If the concrete is not level, washers may be placed over anchor bolts and before shoes are bolted down to serve as leveling devices. 8. Pos

Installing on Sloping TerrainCaution: SimTek Fence is not engineered for use as a retaining wall.Installation on sloping terrain is similar to that on

SimTek Gate Installation GuideGate Components and Tools Needed Gate Post SimTek™ Fence Gate End Post SimTek™ Hinges Latch Striker R